How to Replace Citroen C2 Coil Springs Easily

Preparing for Coil Spring Replacement

Before you start replacing the coil springs on your Citroen C2, gather all necessary tools and equipment. You will need:

• Jack and jack stands
• Socket set
• Spring compressors
• Wrench
• Safety glasses
• Gloves

Ensure you're working in a safe environment with ample space. It's advisable to consult your vehicle's manual for specific guidance related to your model.

Step 1: Safety First

Start by ensuring the car is parked on a flat, stable surface.

1. Wear safety glasses and gloves to protect yourself during the process.
2. Disconnect the battery to avoid any electrical issues.

Step 2: Lifting the Vehicle

Next, lift the vehicle to access the coil springs.

1. Use the jack to raise the front or rear of the car, depending on which coil springs you're replacing.
2. Secure the vehicle with jack stands to prevent it from falling.

Step 3: Removing the Wheel

With the car safely lifted, the next step is to remove the wheel.

1. Use a wrench to loosen and remove the wheel nuts.
2. Take off the wheel and set it aside safely.

Step 4: Accessing the Coil Spring

Now that the wheel is removed, locate the coil spring assembly.

1. Identify the components: the top mount, strut, and coil spring.
2. Loosen and remove the bolts securing the strut to the vehicle using your socket set.

Step 5: Compressing the Coil Spring

Before you can safely remove the coil spring, it needs to be compressed.

1. Apply spring compressors evenly on both sides of the coil spring.
2. Slowly tighten the compressors until the spring is adequately compressed to allow for removal.

Step 6: Removing the Old Coil Spring

With the coil spring compressed, proceed to remove it.

1. Carefully detach the top mount from the strut.
2. Once the mount is removed, gently take out the coil spring.

Step 7: Installing the New Coil Spring

With the old coil spring removed, it's time to install the new one.

1. Align the new coil spring with the strut and place it into position.
2. Reattach the top mount and secure it with the appropriate bolts.

Step 8: Releasing the Compressor

Be cautious while releasing the spring compressor.

1. Unscrew the compressors slowly and evenly to ensure safety.

Step 9: Reassembling the Vehicle

Once the new coil spring is in place, reassemble the rest of the components.

1. Reattach the strut and secure all bolts tightly.
2. Put the wheel back on and fasten the wheel nuts.

Step 10: Lowering the Vehicle

The final step involves lowering the car back to the ground.

1. Carefully remove the jack stands.
2. Lower the jack slowly until the car rests on the ground.

Reconnect the battery, and you're done!

Make sure to test drive your Citroen C2 to ensure everything is functioning correctly.